Almost all mechanical products have to be filled with the right amount of lubricants when they are used. To ensure that the automatic tapping machine runs smoothly, it is necessary to add special lubricants at regular intervals. When the equipment is stuck, it can be very good. To solve the trouble, in addition to lubrication, there are other benefits to using lubricants.
The automatic tapping opportunity for a long time of work produces a fever, and it is easy to cause local damage if it is not cooled in time. The lubricating oil at normal temperature can easily enter the machine, and the temperature of the contacted part gradually decreases. Drilling or manufacturing threads will generate waste. When they accumulate, it will hinder the operation of the equipment and affect the efficiency. Adding lubricating oil can wash the waste in time, make the surface of the workpiece smooth and clean, and the thread is neat and standardized. The lubricating oil used in the tapping machine participates in the rust inhibitor. It can be protected by adding it to the work. The machine and the workpiece can be infiltrated by the lubricating oil to ensure that it will not rust during the processing or even for a long time. Bad. It can be seen that the use of lubricating oil is very large, and the operator cannot forget this work.